Make sure your design is small enough to fit on an 8 x 11 inch (20. 3 x 27. 9 cm) piece of paper. Look at other vinyl sticker designs online for inspiration by searching “vinyl stickers” or “vinyl sticker designs. ” If you’re having trouble coming up with a design, try using copyright-free graphics or images. Sites like Flickr, Pexels, and Canva have a range of designs you can choose from.
Make sure the resolution of your design is at least 300 pixels per 1 inch (2. 5 cm), so it prints clearly later. [1] X Research source
If the software you’re using doesn’t let you specify the size when you open a new document, edit the size after you open the document. Look for the size button in your software’s menu bar. Consider adding multiple designs to one document to print multiple sticker types at once. [3] X Research source Make sure none of your stickers are in the document’s margins; otherwise, they’ll get cut off while printing.
Use clear vinyl printer paper if you want the background of your stickers to be transparent. Try glossy vinyl printer paper to give your stickers some extra shine. Both inkjet and laser printers can print on vinyl paper—just make sure your vinyl paper is compatible with your printer type.
Laminating your stickers makes them water resistant and UV protected. If your over-laminate sheet isn’t the same size as your sticker sheet, it’s all good! Simply cut the over-laminate to size before pressing it onto the sticker sheet.
Use the edge of a ruler or credit card to press the laminate onto the vinyl paper to prevent air bubbles.
If you don’t have a Cricut, no worries! Try cutting out lettering or smaller sticker designs by hand using a craft blade.
The vinyl backing is on the opposite side of the over-laminate (basically, the back of the sticker). Clean the area where you want to put your sticker before placing it to avoid air bubbles or peeling. Vinyl stickers stick to almost any hard, smooth surface indoors and outdoors, so get creative and stick them wherever you’d like!
